Custom-Made Rubber Tip
(13-140A-xxx Square / Rectangular For Thin Die)

13-140A Rubber Tips… for optimum processing of thinned die

The pick-up, handling and attachment of die after backside thinning requires specially designed tools to minimize cracking, breaking, flexing or other stress that may result in damage.  Our new 13-140A Rubber Tip has proven very effective in production use with die as thin as 4 mils (0.10mm).  The 13-140A Rubber Tip features a firm, flat pick-up surface with an X-shape groove to gently distribute vacuum across the die surface.  Both standard and custom-made sizes are available.

Material Specifications
Hardness :79 Shore A
Heat resistance :130 deg. C
Static dissipation :0.01 to 0.03 sec.
Ionic purity :less than 10 ppm

Static dissipation measured as time to dissipate a charge from +/-5000 V. Ionic purity measured by boiling rubber in DI water and analyzing the water extract for fluoride, chloride, potassium, nitrate, phosphate, sulphate, sodium and silicon

Packing: 20 pieces per vial.